Your shopping cart is empty!
0 reviews | Write a review
NESS DX16x Alarm System Panel with
KPX LCD code pad
Battery & Power Supply Kit
Internal Piezo Siren
Internal Screamer Outdoor Siren/ Strobe Kit
3 x NESS QUANTUM PLUS standard PIR's
The NESS Home Alarm System D16X can provide up to 16 wired
or wireless alarm zones " wireless zones require extra receivers added to
this kit" and 2 x 24-hour tamper zones. Which means it can have 8 Alarm
devices wired or wireless and two tamper devices connected to it. Alarm devices
are movement detectors, reed switches and smoke detectors. Examples of tamper
devices are siren box tampers and panel tampers. Having these tamper inputs available
means you don't have to use alarm inputs for tampers increasing the number of
usable alarm zones available for movement devices, perimeter protection
devices, etc. This kits suited to single story Home Alarm System install.
The NESS D16X Home Alarm System provides two
separate areas plus a Home mode and Day Mode. The home mode is programmed to
arm certain devices to protect the perimeter of your home for invasion
protection. The Day mode can have zones in this area that can trigger alarms
during the day when disarmed an example of day mode operation is a you have an
LED light in your upstairs kitchen that informs you that someone has left the
garage door is open.
The NESS D16X Alarm System supports up to 56 user key fobs.
The Code Pads easily configured for door chime operation.
If you add a wireless remote control kit to it, the 3 and
4th key fob buttons can be setup to control garage doors. This function can be
helpful as you will only need one remote for alarm and garage operation. To
make this feature work, it requires programming and an extra output expansion
The kit comes with three NESS Quantum Plus detectors. These
detectors have a single passive Infrared sensor to detect movement. To find out
more about different sensors see this
page The kit comes with either a box siren/strobe or a slimline
siren/strobe you can decide which siren you want when you order the kit.
The NESS D8x /D16x also offers a reasonably priced access
control system with both alarm models expandable to three proximity readers for
door access and alarm control.
The system has an on PSTN board dialer for standard copper
phone line connection. The D16X can be set up for self-monitoring using voice
dialling. Which enables the panel to call your mobile phone when there is an
alarm. When you answer, you will here "alarm" "alarm" if
you don't acknowledge the alarm the D8x dialler system will call the next
mobile number programmed. The NESS D16X can also be set up for contact id
monitoring through a monitored call centre. If you don't have a telephone line
at your house, the D16X will connect to a GSM dialer. The NESS D16X can connect
to your home broadband router through another module available for this kit.
The NESS IP232 Ethernet to Serial Bridge which can control and
monitor your home security system using an Android or iPhone application.
16 wireless or wired Zones
Two unique areas
Four different states Area 1 armed, Area 2 armed, Home armed
and Day Mode
Contact id and Audible Voice
Keypad Chime features
56 NESS Radio Keys ability
Connects to IP to serial bridge for iPhone/ Android
application monitoring and control